https://www.naturewater.eu
Item 64404
Page 7
01 2024-1
Drain clamp assembly
№
Name/description
№
Name/description
1
Drain hose
5
M6×35 screw
2
Cap nut
6
Drain pipe
3
Use
7
M6 nut
4
Drain clamp, front holder
8
Drain clamp, rear holder
Instructions for first operation
1.
Connect the reverse-osmosis system with the adapter. The power-indicator light lights up, the
buzzer sounds three times, and the machine is rinsed for 90
s while the indicator light flashes
blue slowly.
2.
While the indicator light flashes blue slowly, the system starts producing pure water. The device
switches to standby, and the indicator light lights up blue continuously when the water tank is
full.
3.
As soon as the system stops producing pure water, the indicator lamp lights up red. The buzzer
sounds 30 times after 6 hours of uninterrupted operation or if a water leak has been detected.
Replacing the cartridges and maintaining the device
Recommended replacement intervals for cartridges
Stages
Filter cartridges
Function
Service life
(guide value)
(months)
1st stage
PP sediment filter
Removes larger suspended particles from
the water.
3–6
2nd stage
CTO activated-carbon
filter
Effectively remove chlorine, bind colour
and odours, and filter the smallest impuri-
ties from the water to extend the service
life of the reverse-osmosis membrane.
3–6
3rd stage
COC activated-carbon
filter
3–6
4th stage
Reverse-osmosis mem-
brane
Filters the finest pollutants from the water
and allows only pure water to pass
through.
12–24
5th stage
Activate-carbon post-fil-
ter
Purifies the water again and ensures a
good flavour.
3–6
