Connecting the plastic hose with a connector
Trim a plastic hose according to previous measurement.
Insert the plastic hose into the hexagon nut.
Set the white hose plug in the end fitting of the white plastic hose, press it into the hose by
hand or using a tool.
Place the plastic hose into the connector.
Tightly screw the hexagon nut.
Connecting the plastic hose with a quick coupling
Trim a plastic hose according to previous measurement.
Deeply slide the plastic hose into the connector.
Disconnecting the plastic hose from the quick coupling
Remove the small piece.
Press on the round piece until it touches the main body of the quick coupling.
Move off the plastic hose.
Open the three housings, set the three filter cartridge types, PP, CTO, and UDF, into the housings and
seize them (clean the CTO filter and the UDF Filter before setting them into their housings). Then con -
nect the activated carbon afterfilters T33A and T33B to the third filtering step.
The other areas require a PE hose for connecting.
Attach the short three-way valve and the spherical valve to the water tap.
Filter cartridges and their functions
Filter cartridge
Functions
Service life
PP
Removes sand, salts, solid matters and other
substances with a diameter above 5 µ
3–6 months
Granulated car-
bon filter
Absorbs strong-smelling and strong-tasting ma-
terial, chlorine, and chlorine compounds
6–12 months
UDF
Absorbs strong-smelling and strong-tasting ma-
terial, chlorine, and chlorine compounds
6–12 months
T33A
Absorbs odours and adapt the flavour of the
purified water
6–12 months
T33B
Absorbs odours and adapt the flavour of the
purified water
1 year
https://www.naturewater.eu
Item 51107–51109
Page 5
04 2021
-1
