11
Visit NaturesGenerator.com for More Information
Step 7: Insert the 8mm hex key into the rotor sha�. Hold the blade assembly and �ghten the
M16 nut by turning the 8mm hex key counter clockwise. If needed, please use the extender
(not included) to extend 8mm hex key to �ghten the lock nut. Finally, spin the blades slowly
to be sure they turn freely and the hub does move in along the rotor sha�.
Step 8: Place the nose cone over the center line of the blade assembly and snap the nose
cone into place.
Step 9: Carefully raise the tower and secure the base and/or cables.
Nose cone
