Nature Power Solar Security Light 1600 User Manual Download Page 7

Page 7 of 

 8

 

Failure 

Possible Cause 

Corrective Action 

Light does not 
turn on. 

Batteries are not charged. 

Ensure the solar panel is in a location 
where it will receive maximum sunlight 
during daytime hours. 

Turn the light to the 

OFF

 position and 

allow  the  solar  panel  to  charge the 
batteries for 

2

 sunny days. 

Clean the solar panel with a clean, 
damp cloth. 

Switch is in wrong position 

Move the switch to the AUTO position. 

Rechargeable batteries are at the end 
of their life. 

Replace the batteries with new 
rechargeable batteries of the same 
type and size. 

Battery Replacement: 

1.

Batteries are located in the battery
housing located at the back of the
lamp.

2.

Remove Screws from front of the
battery housing to access
batteries.

3.

Replace batteries with
rechargeable batteries of the
same type and rating

4.

Reassemble battery housing.

Sensor is malfunctioning. 

Reset the Sensor: 

1.

2.

Take the light into a dark room and
then switch to the Auto.
Activate the motion sensor in the
dark.

3. Once the light turns on, the

sensors are reset.

4. Wait until the light turns off before

returning the product to a lit room
or area.

Summary of Contents for Solar Security Light 1600









Reviews: