Natural Bed Company
168-170 Devonshire Street, Sheffield, S3 7SG. T: 0114 272 1984
[email protected] www.naturalbedcompany.co.uk
Assembly Instructions for
Kulu
&
Koo
Wooden Beds
Single (.90x1.90m)
Items included in bed flat pack are:
1 x headboard panel
1 x smaller footboard panel
2 x side rails
1 x centre rail (not included if you have ordered a single bed)
1 x set of sprung beech slats
1 x set of double sprung beech slats and sliders
1 x set of plastic end caps (2 per slat)
Fixings:
4x threaded bolts
4x half-moon washers
4x nuts
1x spanner
8x wooden dowels
If you have ordered side tables that attach to the bed frame you will also receive:
2x panels that form the 2 tables
6x bronze bolts
1x small hexagon key
1.
Place the wooden dowels in the outer holes at the ends of the side rails, tap
these in securely. (As images below) If you have ordered the side tables –
ensure the end of the side rail with the additional holes to attach the tables is
placed at the headboard end.
2.
Screw the four threaded bolts into the middle holes of the headboard and
footboard panels. (See images below)
