Native Watercraft Ultimate FX 12, Owner'S Manual, Page: 10 / 16

10
The seat and seat base in your FX is designed so
that it may be completely removed in a few
simple steps.

To begin drop the seat in the low position, then push
the seat as far to one side of the seat base as possible.
Then lift the opposite side of the seat up and slide it
out of the base and boat.

To remove the seat base, first unscrew the 2
adjustment knobs completely. Then find the pull
straps located on the opposite side of the base from
you (pictured below). Grab the strap through the
finger loop and pull slightly up and toward the
middle of the boat. You will need to use some force
to pop the seat base out from under the gunnel of the
boat. Once it pops the base will lift out easily.