Native Watercraft Propel Pedal drive, Owner'S Manual, Page: 9 / 12

9
Remove the end bolt using a
4mm hex wrench. Pull the prop
straight back to remove the prop
and expose the shear pin.
Shear Pin Replacement
In order to ensure that the gears of your Propel™ are not damage if the prop
is hit during rotation, your propeller is fixed to the drive shaft with a shear
pin. An extra shear pin is included with your new boat to ensure you are
never without your Propel™. In the event that you need a new shear pin,
please contact your local dealer to order replacement components.
Replace the shear pin.
Replace the prop, making sure the
pin sets into recesses the in prop.
Replace the bolt and tighten 1/2
turn past the bolt engagement with
the propeller.
Note: The prop bolt only holds the
prop to the shear pin, it does not
drive the propeller, so it does not
need to be very tight..