4
Rudder
The Mariner line of kayaks is equipped with an integrated rudder system that is easy to maneuver using the
“in cockpit” control handle. The rudder blade is located in line with the keel making it very responsive
when called upon. * Do not drag your boat! Dragging your Mariner may cause damage to the rudder blade.
Rudder Controls
Pull the control handle back to guide your Mariner left and push the control handle forward to guide right.
The rudder blade will be aligned with the keel when the handle is perpendicular to the flat edge within its
recess.
Using your Mariner
Initial Set Up:
Adjust the seat for your comfort.
For a more erect
position, tighten the side straps by pulling the free strap ends toward the front of the boat.
For a more relaxed
position, sit up so that the side straps are supporting you, but not stretched tight. Gently pull the
rounded end of each strap buckle up and away from the strap. The strap will lengthen and loosen until you’ve
found your desired position.
Adjust your Easy Foot footbrace.
Unweight the pads.
Pull or push the adjustment bar until the footpad is in the desired position.
When you feel the foot pad click into place on the track, let go of the adjustment bar.
Removing and Re-installing the Seat:
Remove a First Class seat:
Release the buckles holding the seat in position. One buckle will be behind the seat, two others will be on the front
sides of the seat bottom. Slide the seat forward, releasing the seat pan out from under the four deck fittings.
Re-install a First Class seat:
Slide the seat pan under the four deck fittings and then re-attach the three seat buckles.
