Native Instruments TRAKTOR AUDIO 2 MK2 User Manual Download Page 53

Page: 53 / 69

►

Navigate to

Start > All Programs > Native Instruments > TRAKTOR AUDIO 2 MK2 >

TRAKTOR AUDIO 2 MK2 Control Panel

If you cannot find the Control Panel, the software is most likely not installed. In this case,
please reinstall/install TRAKTOR or the driver software as described in section

↑

6.1, Driver

Software Installation on Windows

On the left-hand side of the Control Panel, you find two tabs:

Audio Settings

, and

Diagnostics

►

Click on the tabs to open the corresponding page of the Control Panel.

Proceed to sections

↑

7.1.1, Audio Settings Page

and

↑

7.1.2, Diagnostics Page

for more infor-

mation on the Control Panel's pages.

7.1.1

Audio Settings Page

The Control Panel's Audio Settings page.

In the

Audio Settings

page, you can configure the audio latency and sample rate, and monitor

the device's status.
The

Audio Settings

page consists of two sections:

Audio Processing

and

Device Monitor

. See

the following subsections for further information.

Advanced Configuration of Your TRAKTOR AUDIO 2

Advanced Configuration on Windows (Control Panel)

TRAKTOR AUDIO 2 - Manual - 53

Summary of Contents for TRAKTOR AUDIO 2 MK2






































































Search results

Summary of Contents for TRAKTOR AUDIO 2 MK2

Reviews:

Related manuals for TRAKTOR AUDIO 2 MK2

Brands by name

Popular brands

Native Instruments TRAKTOR AUDIO 2 MK2, User Manual

Search results

Summary of Contents for TRAKTOR AUDIO 2 MK2

Reviews:

Related manuals for TRAKTOR AUDIO 2 MK2

Brands by name

Popular brands