To hear sound from REAKTOR PRISM FX you must play notes via a MIDI instrument or toggle
notes on for at least one voice in the NOTES section. Please also check the THRESH (thresh
old) level in the GATE section as a high THRESH level may also prevent the effect from being
heard.
▪
NOTE PITCH: Shows the pitch of MIDI notes on voice 1-6 and allows you to set the
pitch by mouse dragging.
▪
NOTES BUTTON: Chord latch and transpose:- Switching it on will latch the MIDI-played
voices.- When it is on the voices will not receive MIDI notes. Instead the global tuning
(
TUNE
) will be transposed by the distance between the latest received MIDI note and C3
(=60).
▪
NOTE ON/OFF TOGGLE 1-6: Allows you to toggle a
NOTE
on/off for voice 6 or to latch a
sounding note.
▪
(8) ENVELOPE LAMP: This lamp indicates the signals that trigger the
ENVELOPE
. It can be
controlled by
NOTES
and
GATE
.
▪
(9) ENVELOPE EXCITER: Amount of envelope modulation applied to the output signal of
the Exciter.0.0: no modulation1.0: full modulation (multiplying).
▪
(10) SUM LEVEL LAMP: Sum level control indicator. This lamp shows if the output of the
Mixer section is open. It can be controlled by
NOTES
,
GATE
and the
ENVELOPE
.
▪
(11) MASTER MIX: Crossfades between the input signal of REAKTOR (dry) and the out
put signal of REAKTOR PRISM FX including the effect chain (wet).
Overview of the REAKTOR PRISM FX Interface
Overview of the REAKTOR PRISM FX Interface
REAKTOR PRISM - Manual - 51
Summary of Contents for Reaktor Prism
Page 1: ...Manual...
