Please refer to the documentation provided with Cubase SX / Nuendo for more information on
setting up MIDI for virtual instruments and effects. You may also find more support and infor
mation specific to your scenario on the Native Instruments REAKTOR website forum.
FL Studio
In FL Studio, add RAZOR as an insert to the channel you want to process. In the plug-in
window, on the arrow next to the folder icon on the left in the header, select
Show MIDI
Port
from the drop-down. A new green area appears on the right of the plug-in wrapper’s
header. Drag on this area to select a specific port number. From FL’s main menu select
Channels > Add one > MIDI Out
. On the MIDI Out instrument, select the same port you used
for the plug-in. You can now send MIDI on from the MIDI out instrument’s track to the
plug-in.
Please refer to the documentation provided with FL Studio for more information on setting up
MIDI for virtual instruments and effects. You may also find more support and information spe
cific to your scenario on the Native Instruments REAKTOR website forum.
ProTools 8
Create one MIDI or audio channel with the RAZOR used as an insert. Create a second
track for the incoming MIDI. In the new MIDI track’s Input/output section on the mixer,
select RAZOR. Now make sure you are recording on the new MIDI track (or use monitor to
send MIDI always).
Please refer to the documentation provided with ProTools 8 for more information on setting up
MIDI for virtual instruments and effects. You may also find more support and information spe
cific to your scenario on the Native Instruments REAKTOR website forum.
NI MASCHINE
Just put RAZOR as an effect on a pad in a group, then route either the sound or group
output to your RAZOR pad. Make sure RAZOR is on the first slot as an FX.
How to get RAZORS Vocoder to work
Using RAZORS Vocoder in a DAW
RAZOR - Manual - 73
Summary of Contents for Razor
Page 1: ...Manual...
