National CS-MK120AKH, Operating Instructions Manual

Page: 9 / 18

8
DRY • COOL• FAN Operation
The air conditioner operates with the settings of your
choice.
From the next time on, the air conditioner will operate
with the same settings.
1
2
Press
MODE
and select a mode.
•
Each pressing of the button advances the mode setting
in sequence.
Press
OFF/ON
.
Then OPERATION lamp
lights up.
■
To stop:
Press
OFF/ON
once again.
Then OPERATION lamp goes off.
FILTER POWER TIMER
OFF/ON
■
To change the temperature setting:
■
To change the air flow rate setting:
Press to raise the temperature and press
to lower the temperature.
Press
FAN SPEED
.
•
At smaller air flow rates, the cooling or heating effect is also
smaller.
■
To change the air flow direction:
(See page 9.)
DRY or FAN mode COOL mode
The temperature
setting is not
variable.
C
Set to the temperature
you like.
DRY mode COOL or FAN mode
Five levels of air flow rate setting from “ ” to
“ ” plus “ ” are available.
Display
The air flow
rate setting
is not variable.
Display
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling
effect in any operation mode. You can get the
maximum capacity with a touch of a button.
•
Pressing the (POWERFUL) button during operation starts
POWERFUL operation.
•
POWERFUL operation ends in 20 minutes. Then the system
automatically operates again with the settings which were
used before POWERFUL operation.
Press
POWERFUL
.
Displa
y
■
To cancel POWERFUL operation:
Press
POWERFUL
.
Notes on POWERFUL operation
•
In COOL mode
To maximize the cooling and heating effect, the capacity of
outdoor unit must be increased and the air flow rate be fixed
to the maximum setting.
The temperature and air flow settings are not variable.
•
In DRY mode
The temperature setting is lowered by 3°C and the air flow
rate is slightly increased.
•
In FAN mode
The air flow rate is fixed to the maximum setting.
1
Displa
y
MORE FEATURE
(Three step flow)
At the start heating, the human body feels uncomfortable if it
is directly exposed to the air flow even if it is warm. To
overcome this problem, the air conditioner is equipped with
a three step flow system to provide a comfortable warm air
around you.
1) At the start of operation, the flap is set toward the back.
2) When the air temperature has risen, the air starts
blowing downward to warm up the floor.
3) When the floor and walls are warmed up, the warm air
starts blowing toward the area around people.
NOTE
<Note on DRY mode operation>
This operation dehumidifies the indoor air when it is humid.
MORE FEATURE
(Precedence-room setting)
When setting the preference-room during installation, the
indoor unit’s operation mode always takes priority.
Please adjust the precedence-room setting to match your
life style. Moreover, for precedence-room settings, please
consult your dealer or service shop.
Notes on DRY mode operation
•
This operation dehumidifies the indoor air when it is humid.