8
| WPT Series
www.natvac.com | 800.253.5500
6. Manufacturer’s liability under this or any other warranty,
whether express or implied, is limited to repair of or, at
the manufacturer’s option, replacement of parts which are
shown to have been defective when shipped
7. Manufacturer’s liability shall not be enforceable for any
product until National Vacuum Equipment, Inc. has been
paid in full for such product.
8. Except to the extent expressly stated herein, manufac-
turer’s liability for incidental and consequential damage is
hereby excluded to the full extent permitted by law.
9. Manufacturer’s liability as stated herin cannot be altered
except in writing signed by an officer of National Vacuum
Equipment, Inc.
10. Certain products provided by National Vacuum Equipment,
Inc. are covered by their respective manufacturer’s warran-
ties (e.g., engines used in the NVE engine drive packages).
These products are not covered by the National Vacuum
Equipment, Inc. Manufacturer’s Warranty.
11. Final assemblers responsibility. NVE goes to great lengths
to insure the quality and proper functionality of the products
it supplies. Many products we supply are purchased for
resale or are impossible or impractical to test prior to the in-
stallation of the item in a vacuum system. It is therefore the
responsibility of the final assembler to thoroughly test the
vacuum system and components supplied to the assembler
by NVE prior to the delivery of the final product to the end
user.
12. Not responsible for pump coupling tightness or alignment.
Customer needs to inspect periodically to ensure proper
alignment and to check tightness of set screws.
