National Tree Company
2 Commerce Drive, Cranford, New Jersey 07016 USA
www.nationaltree.com
SAVE THESE INSTRUCTIONS
Operation
Depending on the model and/or style, this fiber optic product can
be turned on by 1) plugging in the power supply adapter and
pushing an on/off switch located on the base, or 2) by simply
plugging in the power supply adapter.
Muti-function models will have a button switch within the adapter
cord (Figure 5). This switch will turn the unit on and off and also
cycle through control of various lighting conditions
(speed/twinkling).
Battery Operation
(if equipped)
Requires 3 AAA size batteries (not included)
1. Open battery compartment (Figure 6) and insert batteries observing proper polarity (+/–).
ON/OFF switch operates the lights.
2. Slide the three legs on to the base as shown in Figure 7.
3. Shape branches as directed in the instructions above.
WARNINGS
• This product is for seasonal decoration only and not intended for permanent installation or use.
• Do not mix old and new batteries. Replace all batteries at the same time.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries or
equivalent.
• Do not use rechargeable batteries.
• Do not dispose of batteries in fire. Batteries may explode and cause injury.
Storage
Gently press branch tips back to folded position. Product can be replaced in carton and should be
stored away from heat, in a cool, dry place.
Figure 5
ON
OFF
Figure 6
INSERT 3 AAA
BATTERIES
INSERT LEGS
INTO BASE
Figure 7
