National Semiconductor TPS65132S, User Manual

Page: 13 / 22

www.ti.com
Software Operation
13 SLVUAY0 – November 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
TPS65132S Evaluation Module
6.5 Demo Mode
The EVM software can be used on its own, that is:
• Without a USB2ANY interface adapter connected to the host PC
• Without an EVM connected to the USB2ANY interface adapter
If starting the EVM software when one of the previous conditions is true, an error message like the one
shown in
Figure 14 displays. Clicking on Continue in Demo Mode operates the software as if an EVM
were connected, but it shows simulated data. Clicking Stop shuts the software down.
If starting in Demo Mode and then connecting to an EVM, uncheck the Demo Mode checkbox in the top
right of the window to exit Demo Mode. If this box is unchecked when there is no EVM connected, an
error message like the one shown in
Figure 14 displays.
Figure 14. Demo Mode Prompt with No EVM Connected