EVM
VPOS
GND
S+
GND
J2
V
Load
VNEG
GND
S
±
GND
J3
V
Setup
8
SLVUAO0 – February 2016
Copyright © 2016, Texas Instruments Incorporated
TPS65132L Evaluation Module
Figure 7. Differential Load Connection
When connecting the USB2ANY interface adapter to the EVM, use the middle ten connections (
).
Figure 8. Ribbon Cable Connected to the Ten Middle Pins of the USB2ANY Interface Adapter
5.2
Software Installation
To change the register settings, install the EVM software on a host PC and install a USB2ANY interface
adapter to connect the host PC to the EVM hardware (
). To download the latest version of the
EVM software:
•
Go to the TPS65132L product folder on the TI Web site (
http://www.ti.com/product/tps65132
)
•
Download the software zip file
•
Unzip the file
•
Run the program
setup.exe
(TI recommends uninstalling existing versions of the EVM software before
installing a new one)
After installing the software, an icon with the name TPS65132 EVM in on the desktop of the host
computer. If this icon is not seen, browse the program files in the Start menu for the software. The default
location is
All Programs
→
Texas Instruments
→
TPS65132
.
Connect the USB2ANY interface adapter to the host computer and then start the software. If the system
asks to update the firmware in the interface adapter, follow the on-screen instructions until the update is
complete.
