Demonstration Board PCB Layout
Figures 3 through 8 shows the different layers used to create
the LM48511SQ demonstration board. Figure 3 is the
silkscreen that shows component locations on the board’s top
surface. Figure 4 is the metal Top Layer. Figure 5 is the metal
Midlayer 1. Figure 6 is the metal Midlayer 2. Figure 7 is the
metal Bottom Layer. Figure 8 is the silkscreen that shows
component locations on the board bottom.
30085508
FIGURE 3. Top Silkscreen
30085507
FIGURE 4. Top Layer
www.national.com
6
AN-1922
