INA260EVM GUI Software
24
SBOU180 – November 2016
Copyright © 2016, Texas Instruments Incorporated
INA260EVM-PDK and Software Tutorial
4.4
Registers Tool
The
Registers
tool (as shown in
) allows the user to monitor and even change the contents of the
internal user-accessible registers of the INA260 on a bit-by-bit basis. Bit names for the selected register
are displayed on the lower panel of the page, but the user is advised to consult the
for
detailed bit definitions that may be necessary when modifying the contents of the input registers.
Figure 20. Registers Tool Page
5
INA260EVM Documentation
This section contains the complete bill of materials, schematic diagram, and PCB layout for the
INA260EVM.
NOTE:
The board layout is not to scale. This image is intended to show how the board is laid out
and is not intended to be used for manufacturing INA260EVM PCBs.
