National Semiconductor ADS42B4 Series, User Manual

Page: 10 / 17

Optional Configurations
www.ti.com
3 Optional Configurations
3.1 THS4509 Input Op-Amp Configuration
The default analog input configuration is transformer coupling through T1 and T2 for channel A, and T3
and T4 for channel B. The optional configuration for analog input is through an Op-Amp THS4509. The
changes required to modify the transformer coupled input to the OPA-driven input are shown in
Table 3 .
Table 3. Jumper Setting for Transformer-coupled or OPA-driven Input
Jumpers or 0 Ω Transformer-coupled input (default) OPA-driven input
R119 Install Do not install
R123 Install Do not install
R120 Do not install install
R129 Do not install install
R143 Install Do not install
R141 Install Do not install
R131 Do not install Install
R132 Do not install Install
R93 Install Do not install
R94 Install Do not install
R95 Do not install Install
R96 Do not install Install
R97 Install Do not install
R98 Install Do not install
R99 Do not install Install
R114 Do not install Install
SJP3 Shunt 2 - 3, default Shunt 1-2
SJP4 Shunt 2 - 3, default Shunt 1-2
J11 and J13 are the power supply for the THS4509. An on-board layout option for a LPF or BPF is
available between the amplifier and the ADC. By default the filter is bypassed, allowing the flexibility to
design according to desired specifications.
10 ADS42B4x EVM SLAU477A – December 2012 – Revised January 2015
Submit Documentation Feedback
Copyright © 2012–2015, Texas Instruments Incorporated