2.
Cut bottom of leg channel (opposite side of
slot). Cut below red line. Do not cut through
slot on leg channel.
3.
Attach foot plate to bottom of leg channel using
two 1/4”-14 x 1” drilling screws
4.
Install leg to ramp/platform using
3” universal
brackets, 3/8”-16 x 1.5” bolts and 3/8”-16
serrated flange nuts
. Slide the universal
bracket assembly into the ramp/platform
channel and attach leg to universal bracket
assembly using 3/8”-16 serrated flange nuts.
Vertical picket legs are assembled in-between
the handrail square posts (as oppose to
installing outboard of the dual rail handrail
square posts)
