Congratulations!
Your Flip·n·Store table is
now fully assembled!
Using enclosed 4mm Allen wrench (H), attach
m
odesty
p
anel (B) to legs with 4 socket screws (G).
If
you want the
m
odesty
p
anel to be seen, then m
ake sure that the cable channel is facing away from
the elongated part of the leg as shown in
Fig. B.
If you want it to be hidden, then face it in the
direction of the elongated part of the leg.
Attach 2 locking casters (D) to the front part of the legs and 2 non-locking casters (D1) to the rear part of the legs as
shown. Tighten with enclosed double sided wrench (J).
Step 2
Fig. B
Grasp the lever on either side of the tabletop and depress
to release lock and lift tabletop until it locks in the upright
position. To lower tabletop, depress lever to release lock and gently lower
tabletop until it locks in the down position.
1
.
800
.
261
.
4112
www.nationalpublicseating.com
To Operate:
