Assembly
10
As
se
mb
ly
II
A
s
s
e
m
b
ly
II
5
Fit the dashboard and windshield assembly
onto the posts near front end of the vehicle.
5
6
7
8
Screw x 4
(
ST4 x 20
)
Screw x4
(
ST4 x 14
)
- Fit a mirror onto the vehicle.
Hint: Each mirror do not seem to fit, try assem
bling on the other side.
- Insert two (ST4 x 14 ) screws into the mirror
with vehicle and tighten.
- Repeat the procedure for the other side.
Screw x 2
(
ST4 x 20
)
Screw x 6
(
ST4 x 20
)
Place the vehicle upside down.
- Slide the bumper support (Ribbed side up)
into the slot front end of the vehicle.
- Insert two (ST4 x 20 ) screws into the bumper
support and tighten.
Fit front bumper onto the vehicle. Insert 6
screws and tighten.
Screw x 2
(
ST4 x 14
)
