National Nail Stinger CS150ST, Owner'S Manual, Page: 6 / 96

www.stingerworld.com
CS150ST
Cap Stapler
CS150ST
TOOL SPECIFICATIONS
Operating pressure 95-105 psi (6, 5-7,5 bar)
Weight 4.2lbs / 1.9kg
Staple capacity 200 staples (2-100 count strips)
Cap capacity 200 plastic collated caps (1 reel)
Air inlet 3/8 NPT
Fasteners 7/8”/22.1mm, 1-1/4”/31.75mm, or 1-1/2”/38.1mm STINGER StaplePac
®
cap
fasteners or STINGER Collated Plastic Caps (10 reels of 25.4mm diameter plastic
collated caps - 200 caps per reel) with 15mm AERFAST ® aluminum staples (100
staples per strip).
Lubrication Add 2 drops of non-detergent, 20-weight oil into the male fitting daily.
Audio Data Loudness levels presented in the table below are in accordance with EN 792-13
(A1:2008)
L pA 1s,1m = 86,7 dB(A)
L
wA 1s = 99,7 dB(A)
L pA 1s, = 90,7 dB(A)
These levels are characteristic of the tool but does not represent the sound that
occurs at the point the tool is used. Workstation design can reduce the noise levels,
for example by placing the work piece on sound absorbent supports.
Vibration Data This value is in accordance with EN 792-13 (ISO 8662-11:1999)
Equivalent Vibration Value = a
hv,eq
(m/s 2 ) = 3,3
This value is characteristic of the tool and does not represent the effect of the hand-
arm system when using the tool.
3