National Meter & Automation T200, Manual

Page: 2 / 24

Endpoint Installation Guidelines
ORI-UM-00025-EN-09
In-line Connectors
An in-line connector is an optional feature that allows connectivity to AMR/AMI devices without the need for a field splice kit .
When the endpoint and encoder have connectors, join the connector ends as shown in Figure 2 . With the proper orientation,
the connector ends go together easily .
• With 308 in-line connectors, align the notch on one connector (endpoint side) with the corresponding projection on
the other (encoder side) and push the ends together for the correct fit . See 308 In-line connector, Figure 2 .
• With Nicor in-line connectors, hold the connector ends with the arrow side up, point the arrows toward each other
and push the ends together for the correct fit . See Nicor In-line connector, Figure 2 .
You will hear a “click“ when the ends are firmly seated and the connection is secure .
308 In-line connector Nicor In-line connector
Figure 2: In-line connectors
Notch
Projection
Arrows
Endpoint side
Encoder side
Endpoint side
Encoder side
Page 8 March 2015