NI WSN-3295 Outdoor IP Enclosure Installation Guide
2
ni.com
The NI WSN-3295 kit includes the following items:
•
NI WSN-3295
•
Two M16 gland shells
•
Two gland inserts, standard size
•
Two gland inserts, reduced size
•
Two gland plugs
•
Two lock nuts
•
2.4 GHz antenna
•
Antenna IP boot
•
Antenna IP sleeve
•
One internal antenna cable connector (pre-installed)
•
No-crimp Ethernet plug
•
Four 4–40 stainless steel screws (to mount the NI 9792)
•
Four 10–32 internal mounting plate screws (pre-installed)
•
One aluminum mounting plate (pre-installed)
•
One Ethernet field termination connector kit
•
One Ethernet interface connector (pre-installed)
•
One Ethernet end cap
•
One internal RJ45 Ethernet cable (pre-installed)
Dimensions
Figure 2 shows the NI WSN-3295 dimensions.
Caution
When mounting the NI WSN-3295, allow at least 72.6 mm (3 in.) of clearance next to the
enclosure quick release latches so you can open the enclosure if needed.
