Index
VXIpc-850 Series User Manual
Index - 2
© National Instruments Corporation
VGA, D-3 to D-4
VXIbus P1 and P2, D-12 to D-13
custom application-specific interface chips,
1-4 to 1-5
customer communication, xiv , G-1 to G-2
D
default settings, 3-1 to 3-3
factory default settings (table), 3-3
parts locator diagram, 3-2
disk drives. See IDE controller;
SCSI interface.
DMA channel
GPIB configuration, 5-10
level for parallel port, PC
configuration, 3-11
resource allocations (table), B-2
documentation
conventions used in manual, xii -xiii
how to use documentation set, xiii
organization of manual, xi-xii
related documentation, xiv
DRIVE LED, 1-5, C-3
drivers for peripherals
installing, 5-2
memory requirements, 5-2
DSEL LED, 1-6, C-3
E
EEPROM configuration, 3-8 to 3-9
fixing invalid configuration, 3-9
power-on self configuration status
(figure), 3-8
protecting against electrical hazards
(warning), 3-9
SMB trigger input termination
(figure), 3-8
electrical specifications, A-1
electronic technical support, G-1 to G-2
e-mail support, G-2
environmental specifications, A-2
equipment, optional, 1-2
Ethernet
configuring addresses, 5-6
default settings (table), 5-6
connector and signals, D-5
interface technical information, 5-7
LEDs for port status, 1-6, C-3
power-on defaults,
PC configuration, 3-11
software installation, 5-6 to 5-7
technical support, 5-7 to 5-8
expansion boards. See I/O expansion boards.
F
FAILED LED, 1-5, C-1
fax and telephone support, G-2
faxback support, G-2
front panel. See also connectors; LEDs on
front panel.
features, 1-5 to 1-6
layout and dimensions (figure), D-2
FTP support, G-1
G
GPIB (IEEE 488.2)
base address, DMA, and IRQ
configuration, 5-10
connectors and signals, D-10 to D-11
PC configuration interrupt level, 3-10
software installation, 5-10
H
hard disk. See IDE controller;
SCSI interface.
I
IDE controller
interface technical information, 5-5
problems with booting hard disk, F-4
software installation, 5-4 to 5-5
using internal IDE drive and external
SCSI hard drive, F-4
