©
National Instruments Corporation
4-1
VXIpc 700 Series User Manual
4
BIOS
This chapter contains information on BIOS, the low-level interface
between the hardware and PC software that configures and tests your
hardware at boot up. This BIOS (Basic Input Output System) provides an
easy-to-use graphical user interface to allow you to configure system
aspects according to your needs.
Entering BIOS Setup
To enter the BIOS setup program, perform the following steps.
1.
Turn on or reboot the system. A screen appears with a series of
diagnostic checks.
2.
When the message
Hit <DEL> if you want to run SETUP
appears, press the <DEL> key to enter the BIOS setup program.
3.
Choose options with the keyboard. Modify the settings to reflect
system options.
Default BIOS Setup Settings
To restore the default settings while inside the BIOS setup program,
select either
Auto Configuration with Optimal Settings
or
Auto
Configuration with Fail-Safe Settings
.
Select the Optimal settings if you want to get maximum performance from
the VXIpc 700 Series. Fail Safe settings are more conservative settings.
Summary of Contents for VXIpc-745-100
Page 1: ...VXIpc 745 100...
