©
National Instruments Corporation
A-1
A
Cabling
This appendix contains cabling requirements for the NI 1428, including
Camera Link cable ordering information.
68-Pin VHDCI Cable Specifications
National Instruments offers cables and accessories for connecting to video
sources, trigger sources, or synchronization sources. However, if you want
to develop your own cable for the 68-pin VHDCI connector, you must use
twisted pairs for each signal.
If you are using the Camera Link Medium Configuration/Trigger Cable for
NI 1428 (
part number 190936-01
), refer to Figure B-1 for the MDR 26-pin
medium configuration Camera Link connector pinout. Refer to Figure B-2
for the 25-pin D-SUB trigger connector pinout.
Note
Refer to the following connector pinouts only if you are using the Camera Link
Medium Configuration/Trigger Cable for NI 1428. If you are not using this cable, refer
to Chapter 3,
, for the standard MDR 26-pin connector pinout.
