![background image](http://html1.mh-extra.com/html/national-instruments/vision-cvs-1455/vision-cvs-1455_user-manual_3429982024.webp)
Chapter 2
LEDs, DIP Switches, and Connectors
NI CVS-1450 Series User Manual
2-8
ni.com
Figure 2-5.
Grounding Lug on the NI CVS-1450 Device
IEEE 1394
The IEEE 1394 connectors on the NI CVS-1450 device provide a reliable,
high-frequency connection between the NI CVS-1450 device and up to
three DCAM-compliant IEEE 1394 cameras. For information about
the amount of bandwidth available for connecting cameras, refer to the
To access the IEEE 1394 connectors on the NI CVS-1450 device, use any
standard 6-pin IEEE 1394 cable.
Note
You can use a 4-pin to 6-pin converter cable with cameras that have their own
external power supply and do not require power from the IEEE 1394 bus.
VGA
The VGA connector on the NI CVS-1450 device provides connection
between the NI CVS-1450 device and a VGA monitor. Use any standard
15-pin VGA cable to access the VGA connector. Figure 2-6 shows the
location and pinout of the VGA connector.
1
Grounding Lug
2
Power Connector
Viso
(5-30VDC)
C
V
(24VDC ±10%)
Ciso
POWER
1
2
Summary of Contents for Vision CVS-1455
Page 1: ...CVS 1455...