National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the
Terms of Use
section on
ni.com/legal
for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products, refer to the
appropriate location:
Help»Patents
in your software, the
patents.txt
file on your media, or
ni.com/patents
.
© 2006–2008 National Instruments Corporation. All rights reserved.
371910E-01
Jun08
When you reconnect and power on the device, it appears as
My Device
in
the Found New Hardware Wizard and Windows Device Manager, as shown
in Figure 19.
Note
When the device is initially installed, the Windows alert message may display the
following:
Found New Hardware: M Series USB 62
xx (OEM)
. This message appears
for a few seconds until the custom name appears and the Found New Hardware Wizard is
launched. This alert message device name cannot be changed.
Figure 19.
“My Device” in the Found New Hardware Wizard and
Device Manager (Windows 2000)
Note
Modifying the INF file will
not
change the USB-622
x
/625
x
/628
x
OEM device name
in Measurement & Automation Explorer (MAX).
