©
National Instruments Corporation
3
NI USB-9213 User Guide and Specifications
Caution
When module terminals are hazardous voltage LIVE (>42.4 V
pk
/60 VDC), you
must ensure that devices and circuits connected to the module are properly insulated from
human contact. You must use the NI 9940 connector backshell kit, shown in Figure 3, to
ensure that the terminals are
not
accessible.
Figure 3.
NI 9940 Connector Backshell
Related Documentation
Each application software package and driver includes information about
writing applications for taking measurements and controlling measurement
devices. Check
ni.com/manuals
for the most recent hardware
documentation and specifications, and refer to Table 1 for a list of locations
for driver and application software documentation. The following
document location references assume you have NI-DAQmx 9.0 or later,
and where applicable, version 8.2.1 or later of the NI application software.
