GETTING STARTED GUIDE
NI USB-7855R
R Series for USB Multifunction RIO with Kintex-7 70T FPGA
Français
Deutsch
日本語
한국어
简体中文
ni.com/manuals
This document explains how to install and configure National Instruments NI USB-7855R.
Safety Guidelines
Caution
Do not operate the NI USB-7855R in a manner not specified in this user
manual. Product misuse can result in a hazard. You can compromise the safety
protection built into the product if the product is damaged in any way. If the product
is damaged, return it to National Instruments for repair.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) as stated in the product specifications. These
requirements and limits are designed to provide reasonable protection against harmful
interference when the product is operated in its intended operational electromagnetic
environment.
This product is intended for use in residential, commercial, and industrial locations. However,
harmful interference may occur in some installations or when the product is connected to a
peripheral device or a test object. To minimize interference with radio and television reception
and prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, you must install the included
snap-on ferrite bead onto the DC power cord of the power supply as described in this
document.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Summary of Contents for USB-7855
Page 1: ...USB 7855...
