![background image](http://html1.mh-extra.com/html/national-instruments/tpc2106t/tpc2106t_user-manual_3461125020.webp)
Chapter 4
Windows CE .NET
©
National Instruments Corporation
4-5
Contrast.exe [Level]:
Sets the display contrast. The parameters are 1 to 10.
RegSave.exe [-s]:
Saves the registry settings. If you use
RegSave.exe –s
, no message box
is displayed whether you are successful or fail.
Reboot.exe:
Saves the registry settings and reboots the TPC-2106/2106T.
Screen.exe [on/off]:
Turns the display on/off. Use
Screen.exe on
to turn on and
Screen.exe
off
to turn off the display.
Iesample.exe [-n] [-f] [ip address/ folder name]:
Launches Internet Explorer. Use
Iesample.exe -n
to close the scroll bar.
Use
Iesamples.exe -f
to activate the full screen. The parameters can
be blank.
Networking
Networking Via Ethernet
Follow these steps to configure the TPC-2106/2106T Ethernet port:
Note
Be sure you are connected to a LAN before booting the system.
Note
The data transfer buffer size per package via Ethernet is about 20,000.
1.
Select
Start»Settings»Network and Dial-up Connections
.
2.
A window displaying all available connections appears. Double-click
the icon for the connection you want to configure.
3.
Select the
IP Address
tab and select
Obtain an IP address via
DHCP
.
4.
Select the
Name Servers
tab and enter the server addresses.
5.
Select
Start»Run
. Enter
regsave
to save the registry settings to a
storage card.