Getting Started with the TPC-22xx
4
ni.com
Caution
Be sure system power is off before plugging in or pulling out the CompactFlash
card.
2.
Verify that the CompactFlash card containing Windows Embedded or
another operating system is installed in the unit.
3.
Connect the power connector to an 18–32 VDC power line. Be sure to
connect the positive, negative, and ground lines as shown in Figure 2.
The power lines can be from either a power adapter or in-house power
source.
Figure 2.
Power Connector
4.
Connect the power connector to the power receptor on the TPC-22
xx
.
The power receptor pin assignment is shown in Figure 3.
Figure 3.
Power Receptor and Pin Assignment
5.
The system powers on immediately after you apply power.
+
–
GND
GND
–
+
