Chapter 3
System Configuration
3-2
ni.com
Touchscreen Calibration
Follow these steps to calibrate the touchscreen:
1.
Select
Start»Settings»Control Panel»Stylus
to access the
Stylus
Properties
window.
There are two tabs in the
Stylus Properties
window:
Double-Tap
and
Calibration
. Use Double-Tap to record the time period between two
taps when double-tapping in Windows CE. Use Calibration to calibrate
the touchscreen.
2.
Click the
Calibration
tab and click
Recalibrate
to calibrate the
touchscreen. A cross appears on the screen in the following locations:
center, upper left, lower left, lower right, and upper right. Use the
stylus to tap the center of the cross until it moves to next location.
Beep Settings
In Windows CE .NET, you can set the TPC-2106/2106T to beep when you
touch the touchscreen.
Follow these steps to enable or disable this function:
1.
Select
Start»Settings»Control Panel»Volume & Sounds
to access
the Volume and Sounds Properties window.
2.
Use the controls in the
Volume
tab to set the volume and enable or
disable the beep for various events and inputs.
