Characteristics
describe values that are relevant to the use of the model under stated operating
conditions but are not covered by the model warranty.
•
Typical
specifications describe the performance met by a majority of models.
•
Nominal
specifications describe an attribute that is based on design, conformance testing,
or supplemental testing.
Specifications are
Nominal
unless otherwise noted.
Screw Terminal Wiring
Wire gauge
Signal wire
28 to 24 AWG
Ground wire
20 AWG
Length of bare wire (insulation stripped)
from one end of the wire
0.5 mm to 0.6 mm (0.020 in. to 0.025 in.)
Screw terminal torque
0.5 Nm (4 lb · in.)
Spacing between screw terminals
3.5 mm (0.14 in.)
Physical
Top cover and strain relief screws
M 2.5
Top cover and strain relief screw torque
0.3 Nm (2.7 lb · in.)
Dimensions
122 mm × 74 mm × 18 mm
(4.8 in. × 2.9 in. × 0.7 in.)
Weight
138 g (4.87 oz)
Environmental Guidelines
Notice
This model is intended for use in indoor applications only.
Environmental Characteristics
Temperature and Humidity
Temperature
Operating
Chassis with slot cooling
capacity ≥58 W
2
0 °C to 55 °C
All other compatible chassis
0 °C to 40 °C
2
Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer
to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve.
TB-4162 User Guide
|
© National Instruments
|
9
