SCXI Quick Start Guide
8
ni.com
Step 5. Attach Terminal Blocks
Attach the terminal blocks to the front of the modules. Refer to
ni.com/products
to determine valid terminal block and module
combinations. Refer to the TBX installation guide for the terminal block if
you are using a TBX adapter.
Step 6. Attach Sensors
Wire sensors to the terminal block or accessory terminals.
•
For signal connection information, refer to the module or accessory
documentation.
•
If any module in the SCXI system has switch or jumper settings, refer
to
Getting Started with SCXI
for more information about configuring
the hardware.
•
For more information about sensors, refer to the following documents:
–
If you are using sensors, refer to
ni.com/sensors
.
–
If you are using LabVIEW, refer to the
LabVIEW Measurements
Manual
packaged with LabVIEW or available from
ni.com/manuals
.
–
If you are using other application software, refer to
NI-DAQmx
Help
for information on common measurements. Access the help
file from
Start»Programs»National Instruments»
NI-DAQ»NI-DAQmx Help
.
1
Modules with Installed Terminal Blocks
2
Attaching a Terminal Block to the
SCXI Module
3
SCXI Module Front Panels
®
5
4
3
2
1
ADDRESS
1
2
3