National Instruments SCXI-1521, User Manual, Page: 9 / 74

Chapter 1 About the SCXI-1521/B
SCXI-1521/B User Manual 1-2 ni.com
❑
Software
– NI-DAQmx 7.3 or later
– One of the following software packages:
• LabVIEW
• LabWindows
™
/CVI
™
❑
Documentation
– Read Me First: Safety and Radio-Frequency Interference
– DAQ Getting Started Guide
– SCXI Quick Start Guide
– SCXI-1521/B User Manual
– SCXI-1317 Terminal Block Installation Guide
– Documentation for your software
The optional accessories listed in Table 1-1 are available for the
SCXI-1521/B.
Table 1-1. Accessories Available for the SCXI-1521/B
Accessory Description
SCXI-1317 Screw terminal block—Mounts on the front of the SCXI-1521/B module and
provides easy access to the terminal for field wiring connections.
SCXI-1310 Connector and shell assembly—Provides 96 eyelet-type terminals for easy
hook-and-solder signal connection and custom mass termination connectivity.
TBX-96 DIN-rail mounted terminal block with 96 generic screw terminals.
One of the following cables is required to connect the TBX-96 to an SCXI
module:
• SH96-96 shielded cable, 1 m
• R96-96 unshielded ribbon cable, 1 m