SCXI-1382 Battery Pack Installation Guide
6
ni.com
Connecting the SCXI-1382 to the SCXI-1000DC Chassis
and SCXI-1383 Power Supply/Float Charger in
Float-Charging Mode
Note
Refer to the
SCXI-1383 Power Supply/Float Charger Installation Guide
and the
SCXI-1383 label for more information about the LEDs.
Caution
Always power off the SCXI-1000DC and the SCXI-1383 before connecting or
disconnecting to each other or to the SCXI-1382.
To connect the SCXI-1383 power supply/float charger to the
SCXI-1000DC and the SCXI-1382 battery pack in float-charging mode,
refer to Figures 1 and 2 and complete the following steps:
1.
Follow steps 1 to 6 in the
Connecting the SCXI-1382 to the
section.
2.
Connect the green DC power connector of the SCXI-1383 power
supply/float charger (P2) to its corresponding connector (J2) on the
rear panel of the SCXI-1382 battery pack.
3.
Connect the IEC 320-style connector of the power cord to its mating
connector on the SCXI-1383 power supply/float charger.
4.
Connect the AC power plug of the power cord to a 100 to 240 VAC,
50/60 Hz power source. Switch on the AC power source.
5.
The SCXI-1383 power supply/float charger is now powered up
and is float-charging the SCXI-1382 battery pack. Power on the
SCXI-1000DC chassis using the power switch on the front panel.
Note
While in float-charging mode, the green LED on the top of the SCXI-1383 case
illuminates only if the battery is not fully charged.
