SCXI-1324 Installation Guide
6
www.ni.com
Cleaning the Terminal Block
Clean the terminal block by brushing off light dust with a soft, nonmetallic
brush. Remove other contaminants with deionized water and a stiff
nonmetallic brush. The unit must be completely dry and free from
contaminants before returning to service.
Specifications
Electrical
Common-mode isolation
Channel to channel ..........................250 V
rms
Channel to ground ...........................250 V
rms
Load or signal current.............................2A maximum per channel
Environment
Operating temperature ............................0 to 50 °C
Storage temperature ................................–20 to 70 °C
Relative humidity ...................................5 to 90% noncondensing
Safety
Designed in accordance with IEC 61010-1, UL 3111-1, and CAN/CSA
C22.2 No. 1010.1 for electrical measuring and test equipment
Approved at altitudes up to 2000 m
Installation Category II
Pollution Degree 2
Summary of Contents for SCXI-1324
Page 9: ......
