SCC-RTD01 Resistance Temperature Detector User Guide
12
ni.com
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
•
73/23/EEC; Low-Voltage Directive (safety)
•
89/336/EEC; Electromagnetic Compatibility Directive (EMC)
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
, search by model number or product line, and click the
appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of their life cycle, all products
must
be sent to a WEEE recycling
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit
ni.com/environment/weee.htm
.
I/O Connector Pin Assignments
Figure 4 shows the I/O connector pins on the bottom of the module.
Figure 4.
SCC Module Bottom View
Table 2 lists the signal connection corresponding to each pin. AI (
X
)
and AI (
X
+8) are the AI signal channels of the E/M Series DAQ device.
AI GND is the AI ground signal and is the reference for AI (
X
) and
1
Pin 1
2
Pin 2
3
PWB Key
4
Pin 19
5
Pin 20
5
4
2
1
3
