Chapter 1
Introduction
SCB-68 Shielded Connector Block User Manual
1-6
ni.com
Figure 1-2 shows how to use a 68-pin cable to connect the SCB-68 to a
68-pin DAQ device.
Figure 1-2.
Connecting a 68-Pin DAQ Device to an SCB-68
Using 100-Pin Cables
You can use the SH1006868 cable assembly to connect two SCB-68
connector blocks to a 100-pin DAQ device. The SH1006868 is Y-shaped,
with a 100-pin male connector on one end and two 68-pin female
connectors on the opposite end. The DAQ device connects to the 100-pin
cable connector, and an SCB-68 can connect to each 68-pin cable
connector. Figure 1-3 shows how use the SH1006868 to cable a 100-pin
DAQ device to two SCB-68 devices.
1
68-Pin Cable Assembly
2
68-Pin DAQ Device
3
68-Pin I/O Connector
4
68-Pin I/O Connector
5
SCB-68 Connector Block
2
3
1
5
4
