Chapter 3
SC-2051
©
National Instruments Corporation
3-7
Figure 3-6.
Pin Assignments for SC-2051 I/O Connector J5
Mounting
The SC-2051 adapter is equipped with metal standoffs so it can sit on a
workbench close to the host computer. A rack-mount is also available and
can be fitted with a flat acrylic plastic cover or metal wraparound cover. To
ground the SC-2051 adapter to the chassis, set the jumper on the adapter as
described in Chapter 10,
.
Cabling
You need a 50-pin ribbon cable to connect the SC-2051 to a DAQ device;
the cable needed depends on the DAQ device. Connections to the SC-206
X
Series boards require a 26-pin ribbon cable. A 26-conductor ribbon cable is
needed for the 8-channel SSR backplane. Additional cables are available
from National Instruments for connection to other accessories.
+5 V
PA0
PA1
PA2
PA3
PA4
PA5
PA6
PA7
+5 V
+5 V
+5 V
+5 V
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
25 26
23 24
21 22
19 20
17 18
15 16
13 14
11 12
9
10
7
8
5
6
3
4
1
2
Summary of Contents for SC-2042-RTD
Page 1: ...SC 2042 RTD...
