Definitions
Warranted
specifications describe the performance of a model under stated operating
conditions and are covered by the model warranty.
Characteristics
describe values that are relevant to the use of the model under stated operating
conditions but are not covered by the model warranty.
•
Typical
specifications describe the performance met by a majority of models.
•
Nominal
specifications describe an attribute that is based on design, conformance testing,
or supplemental testing.
Specifications are
Typical
unless otherwise noted.
3.3 V Digital I/O on 50-Pin IDC Connector
Number of DIO channels
24
Maximum tested current per channel
±3 mA
Input logic levels
Input low voltage, V
IL
0 V minimum; 0.8 V maximum
Input high voltage, V
IH
2.0 V minimum; 5.25 V maximum
Output logic levels
Output high voltage, V
OH
when sourcing 3 mA
2.4 V minimum; 3.465 V maximum
Output low voltage, V
OL
when sinking 3 mA
0.0 V minimum; 0.4 V maximum
Network/Ethernet Port
Number of interfaces
1
Network interface
10Base-T, 100Base-TX, and
1000Base-T Ethernet
Compatibility
IEEE 802.3
Communication rates
10 Mbps, 100 Mbps,
1000 Mbps auto-negotiated, half-/full-duplex
Maximum cabling distance
100 m/segment
Physical Characteristics
If you need to clean the device, wipe it with a dry towel.
Torque for screws
0.45 N · m (4.0 lb · in)
Weight
39 g (1.4 oz)
sbRIO-9698 User Manual and Specifications
|
© National Instruments
|
9
