INSTALLATION INSTRUCTIONS
NI sbRIO-9691/9692 Stacking Kit
The National Instruments sbRIO-9691 and sbRIO-9692 stacking kits are
accessories you can use to stack NI 9
XXX
E board-only C Series modules
under the sbRIO-960
X
/961
X
/963
X
/964
X.
The sbRIO-9691 sheet metal
(part number 195391
X
-01) is for installation with an sbRIO-960
X
board;
and the sbRIO-9692 sheet metal (part number196470
X
-01) is for
installation with an sbRIO-961
X
/963
X
/964
X
board. The sheet metal frames
are labeled with the part number. Throughout this document, the
sbRIO-9691 and the sbRIO-9692 are referred to inclusively as the
sbRIO-9691/9692.
Note
You need an M3 Phillips screwdriver to install the sbRIO-9691/9692 stacking kit.
The sbRIO-9691/9692 stacking kit contains the following components:
1
sbRIO-9691 Sheet Metal Frame OR
2
sbRIO-9692 Sheet Metal Frame
3
sbRIO-969
X
Riser Card
4
M3x5 Screw (Qty. 19 or 22)
OR
1
2
4
3