© National Instruments
|
3-1
3
I/O Information
This chapter describes the RMC-8356 I/O connectors.
Rear Panel Connectors
Serial
Two COM connectors (COM1 & COM2) are provided on the motherboard. Both are located
near the PCI-E slot 4.
SATA
The motherboard includes a total of four SATA connectors, supported by the Intel C236 PCH
chip. These SATA connectors support RAID 0 and 1.
Rear I/O
Refer to the following figure for locations and descriptions of the various I/O connectors on the
rear of the motherboard.
Figure 3-1.
Rear I/O Connectors
LAN
There are two LAN connectors (LAN1/LAN2) on the I/O back panel. There is also a dedicated
IPMI LAN connector on the I/O back panel. These connectors accept RJ45 type cables. Refer to
the
section of Appendix B,
, for more information.
1
IPMI LAN
5
USB2 (3.0)
9
DVI
2
USB1 (2.0)
6
LAN2
10 DisplayPort2
3
USB0 (2.0)
7
LAN1
11 DisplayPort1
4
USB3 (3.0)
8
VGA (Disabled by default)
1
9
8
7
6
5
4
3
2
10
11
1
4
5
6
7
9
11
8
10
2
3
