Moving the PXIe-8267 to a Different System
Complete the following steps to move your PXIe-8267 to a different system or
chassis with a different controller.
Note
The following steps apply only if the PXIe-8267 you are moving to a
different system is in software RAID mode.
Note
To avoid data loss, do not move, swap, or replace the drives.
1. When the system boots, go into
Disk Management
. You will see four dynamic
disks with yellow caution icons. Right-click any disk with a caution icon and
select
Import Foreign Disks
.
2. Be sure the
Foreign disk group (4 of 4 disks)
checkbox is enabled and click
OK
.
© National Instruments
13
PXIe-8267 Getting Started
