Windows 7
For information about driver installation on Windows 7, go to
ni.com/info
and enter the Info
Code
raidsupport
for instructions on where to download the drivers for your device.
Windows 10
No driver is necessary to configure the drives. The Standard Microsoft NVME driver is pre-
installed in Windows 10.
RAID Creation
To configure the software RAID on the PXIe-8267, complete the following steps.
Note
Back up your data before you configure the software RAID.
Note
In the following steps, the disk drive capacities in the images are examples.
You may see different capacities depending on your disk drives.
1.
Right-click
My Computer
and click
Manage
.
2.
Click
Disk Management
in the left window. You should see four disk drives of the same
size in basic mode. If the disks do not have a status of
Unallocated
, right-click any disk
and select
Delete Partition
.
3.
Right-click any disk and select
New Striped Volume
, then click
Next
.
PXIe-8267 Getting Started Guide
|
© National Instruments
|
5
