■
Two front panel LEDs per port that show status:
■
LINK/ACT— The Link/Activity LED indicates one of the following states:
■
No link: off
■
Linked - no activity: green
■
Linked - activity: blinking green
■
SPEED— The Speed LED indicates one of the following states:
■
No link: off
■
Linked - no activity: yellow = 1 GbE, green = 10 GbE
■
Linked - activity: yellow = 1 GbE, green = 10 GbE
Removing the PXIe-8238 from a PXI Express Chassis
To remove the PXIe-8238 from a PXI Express chassis, complete the following steps.
1. Power off the chassis.
2. Remove any cables that may be attached to the module front panel.
3. Unscrew the two bracket-retaining screws in the front panel.
4. Press the injector/ejector handle down.
5. Slide the module out of the chassis.
Cleaning
Use a dry, low-velocity stream of air to clean the PXIe-8238 module. If needed, use a
soft, nonmetallic brush for cleaning around components.
Make sure the module is completely dry and free from contaminants before
returning it to service.
Common Configuration Questions
This section answers common configuration questions you may have when using a
PXIe-8238 module.
ni.com
8
PXIe-8238 Getting Started