background image

Chapter 2

Installation and Configuration

NI PXIe-8106 User Manual

2-14

ni.com

Figure 2-4.  

Multichassis Configuration in MAX

PXI System Configuration

1.

Launch Measurement & Automation Explorer (MAX).

2.

In the 

Configuration

 tree, expand 

Devices and Interfaces

.

3.

In the 

Devices and Interfaces

 tree, expand 

PXI System

. Your PXI 

Express chassis is already identified and appears in the 

PXI System

 

tree.

4.

For each unidentified PXI chassis in the 

PXI System

 tree, right-click 

on the chassis and select the appropriate chassis model through the 

Identify As

 submenu. Further expanding the 

PXI System

 branch 

shows all devices in the system that NI-VISA can recognize.

The PXI specification allows for many combinations of PXI chassis and 
system modules. To assist system integrators, PXI chassis and system 
module manufacturers must document their products’ capabilities. PXI 
Express devices must provide a driver and/or 

.ini

 file for identification. 

For NI PXI Express chassis and controllers, these files are provided as part 

Summary of Contents for PXIe-8106













































































Reviews: